We’re not all created equal. Each of us has our own bio-mechanics and preferences when it comes to how we interact with our bows and the grip forms one of the most important connections.
At RI we’ve worked in conjunction with archers to create a curated collection of replacement grips which are all 3D printed to order out of ABS plastic. At present we can product grips in the following colours.
Jump straight to a specific grip:
OK Absolute Compound Bow
This grip builds on the quality and craftsmanship of this signature bow by increasing the width of the grip while reducing the filleting of the edges resulting in less torque in the hand.
The grip comes in three variants: a flat (or neutral) palm face, a 5º “twist” to the left (usually for RH) or a 5º “twist” to the right (usually for LH).
The vertical angle of the grip matches the lines of the riser.
NZD35.00 + P&P
Note: The images below are rendered and not an indication of the finished texture.
Mathews (pre 2019)
Designed as replacement grip for every Mathews bow with the removable black grip or Focus grip, excluding their 2019 model bows.
This grip comes in two variants: one with a raised shield and one without the shield. The vertical angle of the grip is set at 2º.
NZD50.00 + P&P
Note: The images below are rendered and not an indication of the finished texture.
Hoyt Target Grip
Designed for use with the modular gripped Hoyt target line products like the Podium, Hyper Edge, Prevail and Pro Force.
This grip comes in three variants: A vertical angle of 0º, 3º or 15º.
NZD35.00 + P&P
Note: The images below are rendered and not an indication of the finished texture.
Petron Bow
Designed for use with the entry level ambidextrous bows produced by Petron, this grip aids the novice archer by:
- Creating a wider “palm-print” to better support hand placement. This in turn helps reduce the side-to-side torquing of the bow in the hand.
- Raising the grip to a higher position to help alleviate wrist fatigue.
- Providing tactile feedback on the bow hand so the archer is aware of hand/palm placement on the grip.
This grip is also ambidextrous so the bow can continue to be used by both LH & RH archers.
NZD35.00 + P&P
Note: The images below are rendered and not an indication of the finished texture.
